Difficulties and problems with the innovation process in academia. Paula Salomão Martins Universidade Federal de Juiz de Fora, MG Brasil - PDF

Description
Difficulties and problems with the innovation process in academia Authors: Paula Salomão Martins Universidade Federal de Juiz de Fora, MG Brasil Phone:

Please download to get full document.

View again

of 12
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information
Category:

Graphic Art

Publish on:

Views: 30 | Pages: 12

Extension: PDF | Download: 0

Share
Transcript
Difficulties and problems with the innovation process in academia Authors: Paula Salomão Martins Universidade Federal de Juiz de Fora, MG Brasil Phone: Address: Rua Dr Dirceu de Andrade, 107/apt 402. Juiz de Fora, MG, Brasil. Zip Code: Thais Cristina Pereira Ferraz Universidade Federal de Itajubá, MG Brasil Phone: Address: Campus Prof. José Rodrigues Seabra, Instituto de Engenharia de Produção e Gestão. Itajubá, MG, Brasil. Zip Code: Luiz Henrique Dias Alves Universidade Federal de Juiz de Fora, MG Brasil Phone: Address: Rua José Honório Loures, 235. Juiz de Fora, MG, Brasil. Zip Code: POMS 23rd Annual Conference Chicago, Illinois, U.S.A. April 20 to April 23, 2011 1 INTRODUCTION Brazil is set in a context of limited success in its innovation development when compared to developed countries and the other BRICs countries - like China - especially in academia, where discoveries are often manifested in dissertations and theses, but rarely end up generating benefits to society and to the researcher through their application and dissemination in the market (Martins, 2011). In Brazil, entrepreneurial initiatives in the academic sphere are still in an early phase. But the government is already showing support for this type of venture. Freitas, Gonçalves, and Cheng (2010, p.2) comment that in the Brazilian context, although the results are still pretty modest, some specific government actions can already be seen, such as support for a number of spin-offs or technology-based start-ups. The creation of the Law and the Executive Order of Innovation (Decree no. 5563, 2005; Law no , 2004) 1 testifies to the growing importance being placed on the need to assist in the generation and consolidation of technology-based companies on a national level (FREITAS; GONÇALVES; CHENG, 2010 and SILVA; MOTTA, 2008). However, Brazilian academic entrepreneurs need technical-managerial support, as well as government support, for their ventures to take any real effect and generate socio-economic value (CHENG et al., 2007). Thus, it is clear that there are still many difficulties to be overcome by Brazilian researchers for their innovations to generate all their potential benefit. 1 Decree No of October 11, Regulation to Law No of December 2, 2004, which provides for incentives for innovation and scientific and technological research in the production sector, and for other measures. 2 THE CONCEPT OF INNOVATION The minimum requirement determining an innovation is that the product, the process, the marketing or organizational method be new (or significantly improved) for a given organization or society. According to Taylor (1994), the process of technological innovation, described by traditional models, begins with the identification of a need or opportunity for improvement and incorporates knowledge and constraints of the technological, economic, and social environments until resulting, eventually, in an invention. When incorporated into a product and introduced to the market, this invention becomes an innovation, and the diffusion stage begins, with the product's market launch. According Zawislak (TIDD; BESSANT; PAVITT, 2008), what is considered invention, and not innovation, is a new technology or product that cannot generate sufficient returns to offset the investment made in knowledge, necessary information, and creativity expended, much less generate an extraordinary profit to those who so ventured. To generate this return, it is important that there is an integration among technology, market, and company, forming a strategic vision of innovation (TIDD; BESSANT; PAVITT, 2008). 3 THE PROBLEMS OF INNOVATION According to Tidd, Bessant, and Pavitt (2008), the real challenge of innovation is not invention, but how to make it work technically and commercially. Innovation is more than just conception of an idea, it is the process of developing its practical use. Van de Ven et al. (1989) in their studies, call attention to the complexity of the ways in which innovation develops over time, and propose some interesting additions to the basic model of innovation: Shocks promote innovations; Ideas abound; Setbacks occur frequently, plans are overly optimistic, commitments increase, mistakes accumulate, and vicious cycles may develop; The restructuring of the innovation team usually occurs as a result of external intervention, change in staff, or other unexpected events; Top management plays an important role; Success criteria change over time, differ between groups, and turn innovation into a political process; and Innovation requires learning, but many of its results are due to other events that occur as innovation develops. Thus, to generate value, innovation must be set in a broad perspective. It is not enough to focus on a single dimension of innovation: organizational, market, and technological changes interact. Better management of research and development can improve the efficiency or productivity of technological innovation, but will contribute little to the product's effectiveness, and therefore can not guarantee commercial and financial success (BESSANT, 2003). Accordingly, Tidd, Bessant, and Pavitt (2008) suggest that innovation should not be seen in a limited way. This concept should include: Viewing innovation as a process of linear technology push or one in which it is trusted that the market will drive innovation; Seeing innovation simply in terms of major breakthroughs and ignoring the significant potential of incremental innovation; Viewing innovation as a simple isolated change, rather than part of a broader system; Seeing innovation only as a product or process, without recognizing the interrelationship between them. In addition, one must consider that there is a high degree of uncertainty in innovation (Rosenberg, 1994), generated by technical, market, social, and political factors, among others. As one moves from incremental to radical innovation, the degree of uncertainty increases, to the point that what is being developed is unknown. This makes the chances for success of an innovation not very large, unless this is monitored by a well structured management process (TIDD; BESSANT; PAVITT, 2008). Thus, two factors related to innovation are agreed upon: innovation is a process, not an isolated event, and must be managed as such; and the influences on this process can be manipulated to affect the outcome, that is, innovation can be managed (TIDD; BESSANT; PAVITT, 2008, p.107). 4 INNOVATION AT UNIVERSITIES AND RESEARCH CENTERS In the Middle Ages, the university looked only to teaching activity, transmitting the knowledge already generated. They were created almost exclusively for the purpose of generating scientific and technological knowledge, and training skilled labor (REIS, 2004). In the late nineteenth century, most academic institutions began to emphasize the link between teaching and research, resulting in the so-called First Academic Revolution (GARNICA; TORKOMIAN, 2009). As generators of knowledge, universities became an object of interest of approach for the production sector, while the majority of public research funds allocated to universities in the United States became scarce. This led to a search on the part of academics to supplement the resources for research through interaction with private capital (ETZKOWITZ, 2004 apud GARNICA; TORKOMIAN, 2009). Added to this concern was the fact that new scientific-technical know-how for industrial application began, via a process of spill-over from research activities, to result in new technologybased companies. Thus, actually, it is observed that universities were expanding their sphere of activities through greater interaction with other segments of society, and thereby increasing their return to society (REIS, 2004). In this context, the establishment of technology management policies in academia became essential to ensure the interests of both parties (universities and companies) and allow a maximization of the use of technologies generated, while seeking to minimize conflicts. The two main aspects that comprise a university's technology management policy relate to the intellectual protection of technology, for its appropriation by the university, and its transfer to industries that can implement it (GARNICA; TORKOMIAN, 2009). Thus, as part of the institutional context, organizational structures were created within universities, or even associated with them, to manage intellectual property and technology transfer. This is due to the high degree of specificity and complexity required in the collaborative process between universities and companies, in which are seen barriers to cooperation, such as extending of project times, higher degree of uncertainty, the existence of basic research at the university, the different administrative philosophies of the organizations, and excessive bureaucracy in the academic structures (SEGATTO-MENDES; SBRAGIA, 2002 apud GARNICA; TORKOMIAN, 2009). 5 METHODOLOGY The Survey research method was used to carry out this work. Research questionnaires were developed and applied, and answered by university researchers known for developing innovative activities. The article is part of a research project conducted by Martins (2011). 6 RESEARCH RESULTS 6.1 Universities and Research Centers Table 1 lists the participating educational and research institutions. Table 1 - Participating educational and research institutions. DEPARTMENT Department of Mechanical Engineering Department of Science and Technology Department of Production and Mechanical Engineering Electric power department Department of Electric Circuits CODAGEO Department of Physical Education I Vision Laboratory Department of Chemicals Bioinformatics and Animal Genomic Laboratory Building site department Department of pharmaceutics Department of Biotechnology Department of Geology Department of Entomology Pró-reitoria de Graduação Department of Spectroscopy and Materials UNIVERSITY OR RESEARCH CENTER University of São Paulo USP Southeast Federal Institute of Technology -MG Ouro Preto Federal Institute of Technology Federal University of São Carlos - UFSCar Federal University of Bahia- UFBA Embrapa Gado de Leite Universidade Católica de Brasília Federal University of Minas Gerais - UFMG National Institute of Research - Amazonia State University of Feira de Santana- Bahia Part 1 - General Approach to Innovation Tables 2 and 3 present the results obtained on the opening questions from the questionnaire given to researchers from universities and research centers (CP). Such questions are important in elucidating general themes of innovation in laboratories and departments. Table 2 - Innovation types developed in the institutions or laboratories TYPES OF INNOVATIONS NUM. PORCENT. Products and Services 5 25% Process 6 30% Technological 13 65% Social and Sustainable 6 30% Other: Development of Methodologies and Modellings 1 5% Table 3 - Innovation focus in the institutions or laboratories INNOVATION FOCUS NUM. PORCENT. Radical Innovation 2 10% Incremental Innovation 10 50% The two previous answers 8 40% Through the analysis of Tables 2 and 3, one can see that the main type of innovation developed by researchers participating in the study is technological innovation, and that there is a balance between incremental and radical focus. Part 2 - Tools for Innovation Management (IM) Tables 4, 5, and 6 show the results obtained on the questions relating to the researchers' use of innovation management (IM) tools or systems. Such questions are important in verifying whether the widespread practices in the literature are known and used in the conduct of the innovations in academia, and identifying the main difficulties for the conduct of the processes of innovation (PI). Also, the main reasons for not using IM tools are presented. Table 4 Use of Innovation Management (IM) tools Yes 3 15% Not 17 85% Table 5 - Difficulties and / or disadvantages in the use of IM tools DIFFICULTY OR DISADVANTAGE NUM. PERCENT Lack of knowledge of the tools 1 33% Lack of staff training for use of tools 3 100% Complexity of the tool 1 33% Adapting the tool to the academic environment and culture 3 100% Bureaucratization generated by the use of the tool 0 0% Increased innovation process costs generated by deployment of the tool 0 0% Other: Length of time for information generation by the tools 1 33% Table 6 - Reason for not using IM tools REASONS FOR NON-USE OF TOOLS NUM. PERCENT Lack of knowledge of the tools 13 76% Unfamiliarity with the benefits generated by the use of tools 6 35% Lack of staff training for use of tools 6 35% Complexity of the tool 0 0% Adapting the tool to the academic environment and culture 2 12% Bureaucratization generated by the use of the tool 0 0% Increased innovation process costs generated by the deployment of the tool 0 0% The need for deployment of tools is not perceived in the laboratory or department 4 24% The tools are not applicable to the academic environment 0 0% The tools are not suited to academia 1 6% Other: There was no structured process for innovation management 2 12% Based on the results presented in Tables 4, 5, and 6 it can be stated that, for all researchers participating in the study who use management practices, the main difficulties are related to lack of staff training for use of the tools, and lack of adaptation of these practices to the academic environment. And the majority, who do not use management tools, responded that this was due to their unfamiliarity (76%), and no researcher said it was due to the complexity of the tool, the bureaucratization generated by it, the increased costs generated by its implementation, or non-applicability of these practices to the academic context. Part 3 - Complementary Aspects of Innovation Tables 7 and 8 show the results obtained on questions relating to the implementation of partnerships, this being an important means of developing innovation in the Brazilian academic environment. Table 7 - Establishment of partnerships Yes 16 80% Not 4 20% Table 8 - Difficulties in the establishment of partnerships DIFFICULTIES NUM. PORCENT. Differences in strategies and goals 6 38% Problems with the partner 3 19% Weak -Strong relationship 3 19% Cultural incompatibility 2 13% Insufficient trust 3 19% To expose the knowledge 3 19% Putting on operational/geographical 2 13% Personal disagreements 1 6% Lacks or communication difficulty 3 19% Lack of commitment 3 19% Inefficiency and lack of freedom 2 13% Time. Unreal expectations 2 13% Asymmetric incentives (when the benefits for the parts are not balanced) 1 6% Turns the development of costlier and complicated product 1 6% Difficulty of accomplishment of shared research 2 13% Other: Bureaucracy and non investment for the companies in the shared research 2 13% With respect to this subject matter, the main difficulties experienced by academic researchers are related to differences in strategies and goals (38%) between the university or research center and its partner (companies or other universities). Part 4 - General Aspects of the Innovation Process On the question related to problems encountered in the innovation process, various issues were raised by the researchers, such as: Lack of time and skilled labor for research, since the professors have classroom and advisory commitments; Researcher unfamiliarity with the concepts and implications of innovation; Difficulty of taking the idea from paper and putting it into practice; Lack of financial and human resources for research; Difficulties in establishing partnerships with companies, with little commitment from the various connections and partners in the resolution of difficulties arising during implementation of the innovation project; Existence of bureaucratic and legal obstacles, especially in public service; Ideological resistance to innovation; Lack of internal governance and controls of the institutions and research centers; and Lack of culture or difficulty in obtaining intellectual property. 7 CONCLUSIONS From the results presented in the study it can be concluded that: In Brazil, there are still difficulties related to the culture for innovation, especially within universities and research centers, as these environments do not offer the best framework for the development of innovation. Despite the known benefits and positive impacts that innovation can bring to society, its development process is not yet formally managed, with a large widespread unfamiliarity on the part of researchers about the existence of innovation management practices or the benefits arising from their use. In the establishment of partnerships - one of the most widely used forms of strengthening the relationship between universities and industry -, differences in objectives and strategies among partners still exist, which can compromise not only the outcome of the research involved, but also reduce the benefits that could be generated for both parties. Despite government initiatives to stimulate innovation, there are still cultural issues that must be surmounted so that innovation can be fully developed. To improve the innovation process and its viability, innovation management tools should be better disseminated in the scientific community and their use should be encouraged. However, there should be a policy of researcher assistance and guidance toward adopting these practices, since some tools can be complex and require training to implement them in the academic routine. 8 REFERENCES BESSANT, J. High Involvement Innovation. Chichester: Jonh Wiley & Sons, Ltd., CHENG, L. C. et al. Plano Tecnológico: um processo auxiliar ao desenvolvimento de produtos de empresas de base tecnológica de origem acadêmica. Locus Científico, 1, p FREITAS, J. S.; GONÇALVES, Carlos A.; CHENG, L. C. O Fenômeno dos Spin-Offs Acadêmicos: Estruturando um Novo Campo de Pesquisa no Brasil. In: ENCONTRO DA ASSOCIAÇÃO NACIONAL DE PÓS-GRADUAÇÃO E PESQUISA EM ADMINISTRAÇÃO, 34, 2010, Rio de Janeiro. Anais... Rio de Janeiro: ANPAD, GARNICA, L. A.; TORKOMIAN, A. L. V. Gestão de Tecnologia em Universidades: Uma Análise do Patenteamento e dos Fatores de Dificuldade e de Apoio à Transferência de Tecnologia no Estado de São Paulo. Gestão & Produção, v. 16, p , MARTINS, P. S. Estudo da relevância de práticas de inovação: um comparativo universidade-empresa. Juiz de Fora: UFJF, f. Trabalho de Conclusão de Curso (Graduação em Engenharia de Produção) Universidade Federal de Juiz de Fora, Juiz de Fora, 2011. OSLO MANUAL. Diretrizes para a coleta e interpretação de dados sobre inovação. 3. ed. OECD: Organização para a Cooperação e Desenvolvimento Econômico. FINEP, REIS, D. R. Gestão da inovação tecnológica. Barueri: Manole, ROSENBERG, N. Exploring the Black Box: Technology, Economics, and History. Cambridge: Cambridge University Press, SILVA, S. M. A; MOTTA, A. L. T. S. Ciência e Tecnologia no Brasil: A Lei da Inovação. In: CONGRESSO NACIONAL DE EXCELÊNCIA EM GESTÃO, 4, 2008, Niterói. Anais... Niterói: IV Congresso Nacional de Excelência em Gestão, TIDD, J.; BESANT, J.; PAVITT, K. Gestão da inovação. 3. ed. Porto Alegre: Bookman TOLEDO, J. C. Gestão da mudança da qualidade de produto. Gestão & Produção, v. 1, n. 2, p , ago VAN DE VEN, Andrew H.; Angle, Harold L.; POOLE, Marshall Scott. Research on the Management of Innovation. New York: Harper & Roe, 1989.
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks