Computer-simulation study on fire behaviour in the ventilated cavity of ventilated façade systems - PDF

MATEC Web of Conferences 9, (2013) DOI: ßmatecconfß C Owned by the authors, published by EDP Sciences, 2013 Computer-simulation study on fire behaviour in the ventilated cavity

Please download to get full document.

View again

of 11
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.


Publish on:

Views: 21 | Pages: 11

Extension: PDF | Download: 0

MATEC Web of Conferences 9, (2013) DOI: ßmatecconfß C Owned by the authors, published by EDP Sciences, 2013 Computer-simulation study on fire behaviour in the ventilated cavity of ventilated façade systems María P. Giraldo 1, Ana Lacasta 2, Jaume Avellaneda 3 and Camila Burgos 1 1 INCAFUST Catalan Institute of Wood, Barcelona, Spain 2 Architectural Buildings Department, Technical University of Catalonia (UPC), Barcelona, Spain 2 Applied Physics Department (EPSEB), Technical University of Catalonia (UPC), Barcelona, Spain Abstract. Fire spread through the façades is widely recognized as one of the fastest pathways of fire spreading in the buildings. Fire may spread through the façade in different ways depending on the type of façade system and on the elements and materials from which it is constructed. Ventilated façades are multilayer systems whose main feature is the creation of an air chamber of circulating air between the original building wall and the external cladding. The chimney effect in the air cavity is a mechanism that improves the façade s thermal behaviour and avoids the appearance of moisture from rain or condensation. However, in a event of fire, it may contribute to the quickest spreading of fire, representing a significant risk to the upper floors of a building. This study deals with some aspects of fire propagation through the ventilated cavity in ventilated façade systems. Also we review the provisions stipulated by the Spanish building code (Código Técnico de la Edificación, CTE) [1] to avoid fire spread outside the building. The results highlight the importance of the use of proper fire barriers to ensure the compartmentalization of the ventilated cavity, as well as the use of non-combustible thermal insulation materials, among others. In addition, based on the results, it might be considered that the measures stipulated by the CTE are insufficient to limit the risks associated with this kind of façades systems. The study has been performed using field models of computational fluid-dynamics. In particular, the Fire Dynamics Simulator (FDS) software has been used to numerically solve the mathematical integration models. BACKGROUND The ventilated façade system belongs to a group called cladding systems and is an updated version of that known as cavity wall. This method of construction was introduced in the Northwest of Europe during the 19th century and gained widespread use from Both systems base their performance on the air chamber of the cavity, and while the cavity wall system has been used only in brick walls, the ventilated façade has a vast variety of finishes. Nowadays the trend in architecture is towards a growing usage of lightweight construction systems that are quick to install (drywall construction), versatile and have a high technical and aesthetic value. The ventilated façade has all these characteristics as well as providing a good performance from an acoustic and hygrothermal point of view. In Spain and other Mediterranean countries, the use of ventilated façades over the last ten years has significantly increased as a result of the good performance of this kind of façade system. They are used in new buildings as well as in the refurbishment of façades. This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Article available at or MATEC Web of Conferences (A) (B) (C) Figure 1. Façade cavity systems (A) Cavity wall (B) ventilated façade (C) elements of ventilated façade. The use of ventilated façades offers advantages such as: Contributes to thermal comfort and energy saving: the fitting of insulation on the outside of walls and slabs eliminates thermal bridges in any part of the façade, thereby preventing the loss of heat to the exterior in winter and absorbing heat in summer. Elimination of condensation on the inside of the façade wall: the pressure difference between the air in the cavity and outside leads to the creation of an airflow known as the chimney effect, which eliminates humidity in wet conditions and prevents condensation. However, in terms of fire safety, the chimney effect poses a risk, because the ventilated cavity may provide a pathway for the fire to spread quickly. In general, the provisions of the Spanish building code (CTE) on external fire spread are perceived as insufficient to address risks associated to the fire spreading through the façades, taking into account the different types and design of the façade. This study focuses on the CTE provisions regarding ventilated façades with the purpose of analyzing the risks which are not sufficiently covered. Fire spread through the ventilated cavity When there is a fire in a building, the façade may be one of the quickest spreading pathways. Some types of façades, as in the case of ventilated façade systems, pose a greater risk because of the characteristics of the elements that comprise them. The ventilated façade is a multilayer system consisting of the following elements (Fig. 1C): 1. Support: (wall, column, slab, etc) a resistant structural element which is part of the building and is responsible for transmitting forces to the structure of the building. 2. Substructure/ fixing system: a set of resistant elements responsible for transmitting forces received by the cladding to the support. Metal railing systems, usually aluminium uprights and cross members. 3. Insulation: Located on the exterior side of the supporting wall. 4. Air chamber: The cavity formed by the separation between the cladding and insulation (fixed to the building wall). 5. Cladding: The outer face of the façade, which be composed of different materials. Several authors have highlighted the influence of the geometric factor of the façade in the development of a fire and its spread through the façade surface [2, 3]. In particular, it has an impact on the speed of propagation of fire, and the shape and trajectory of the fire plume p.2 1 st International Seminar for Fire Safety of Facades, Paris (France), 2013 The arrangement of the components of a multilayer façade, such as the ventilated façade, may be understood as part of its geometric development. Therefore, the ventilated cavity is an element that significantly influences the behaviour of fire. In a ventilated façade, fire may spread along the following routes: 1. Through the window openings by the so-called leap frog effect. 2. Through the surface of the cladding, when the reaction of the material to fire contributes to the rate of fire spread, and 3. through the ventilated cavity, if adequate fire barriers are not employed; due to the chimney effect, this latter factor is considered the fastest propagation pathway [4]. In this study we focus only on this last case. Once the fire is within the ventilated cavity, the hazards associated with the fire spreading through the cavity are as follows: Thermal properties of insulation. If a combustible material is used (which is often the case), fire intensity increases. The substructure of the façade. In this type of fire incident, the temperature within the fire envelope may achieve a local temperature in excess of 600 C. Regardless of the external panel construction, if fire enters the cavity and comes into contact with the aluminium substructure, it may begin to lose its local strength and integrity as it is heated. Under prolonged fire exposure conditions, the railing system could melt, which may lead to localised system collapse. Cavity shape and chimney effect. As mentioned above, fire spread in ventilated façades occurs through the windows and the ventilated cavity. This may occur simultaneously. When flames are confined by the cavity, they will become elongated as they seek oxygen and fuel to support the combustion process. This process, together with the chimney effect, may lead to a flame extension five to ten times greater than of the fire plume spreading through the windows [4], regardless of the materials used as insulation. This may enable fire to spread quickly and unseen through the external cladding system, if appropriate fire barriers have not been provided. Vulnerable areas. Window and door frames may provide a direct entry route to the cavity. These are usually made of aluminium or PVC and lack fire barriers or seals. Provisions of the CTE on ventilated façades The Spanish building code CTE (DB SI) Fire Safety (Sects. 1 and 2) addresses the spread of fire in a very general way. It makes only a succinct reference to façade ventilated systems. In particular, it relates to two aspects: Fire barriers, under the following conditions: Barriers in cavities are required every 3 storeys or 10 m, in buildings higher than 18 m. Barriers in cavities are required every 3 storeys or 10 m, in buildings less than 18 m, except in cases in which insulation materials meet the classification of fire reaction B-s3,d2, i.e. it has a low level of combustibility. Otherwise, no fire barrier is required. Combustibility of thermal insulation material, under the following conditions: The insulation should meet the classification of fire reaction B-s3,d2 throughout the height of the entire building, in buildings higher than 18 m. The insulation should meet the classification of fire reaction B-s3,d2 until 3.50 m in public access areas. The rest of building does not have this requirement. The regulation does not provide details about these requirements p.3 MATEC Web of Conferences Table 1. Computational domain. Scenarios Mesh size (m) Number of cells Cell size Basic scenario , Double size scenario , OBJECTIVES This study aims to assess fire behaviour and its propagation through the cavities of ventilated façades systems. In particular, we seek to assess the level of protection provided by the measures stipulated by the CTE. We focus our study on the following aspects: A. Fire barriers in the ventilated cavity. Two different methods for partitioning the cavity are considered. B. The influence of the use of combustible and non-combustible thermal insulation. C. The influence of the size of the cavity and level of ventilation. Three variables are considered: low, medium and high ventilation. METHODOLOGY This research is conducted using field models of computational fluid-dynamics to evaluate some aspects of fire dynamics in the different cases studied, the conditions of which are explained below. In particular, the following software is used: The Fire Dynamics Simulator (FDS) to solve the models PyroSim for the graphical interface, and Smokeview to visualize the results. Computer-simulation is a useful tool that provides an approach to the problem of fires, taking into account different variables and scenarios. One of the great advantages of simulation is the possibility to study some aspects of the phenomenon of fire without incurring the high costs of laboratory tests. This does not mean that computer-simulation can replace the laboratory tests; however, it is a powerful tool for carrying out complementary studies, mainly as regards the physical behaviour of fire. In this research a scenario representing a fire in a living room is considered. The fire starts on a couch in the ground floor of the scenario. To achieve this, an ignition source of 400 cm 2 is placed on the surface of the couch. This source is characterized by a burner with a heat release rate of 1000 kwßm 2. Once the fire reaches the stage of flashover, it spreads to the outside through the windows. The windows are disabled when a device (heat detector) reaches 300 C. Moreover, the window frames are disabled when a device (heat detector) reaches 500 C (Considering a failure in the aluminium window frames due to fire exposure) as a result fire enters to the cavity. Fire growth occurs according to the calculation performed by the software. The FDS solves the equations governing the simulated system and provides graphical and numerical data for each scenario. The models show a simplified representation of the analyzed cases. Eight cases are evaluated based on a common computational domain and a fire scenario. Table 2 describes the variables considered in each case under study. The characteristics of the computational domain and the scenarios are described below. Computational domain Two computational domains are performed; one is the basic scenario and the other is double the size scenario. The basic scenario size is 6.50 m 4.90 m 8.25 m. Each cell has a uniform size (0.10 m 0.10 m 0.10 m). Table 1 shows the information about the two domains. Previously, two different computational domains are also performed for the same scenario to compare the evolution of fire: with cell size (0.20 m 0.20 m 0.20 m) and (0.10 m 0.10 m 0.10 m). The results were similar for both domains. The smaller mesh was chosen to all simulations p.4 1 st International Seminar for Fire Safety of Facades, Paris (France), 2013 B A Open door Figure 2. Computational domain three-storey scenario. Figure 3. Geometric description of the scenarios and location of the thermocouples. Table 2. Case studies. (C) Cavity size and ventilation level (A) Fire barriers (B) Thermal insulation FB WB CI NCI Floor Window Combustible Non combustible barriers barriers insulation insulation LV o o o o Low ventilation MV o o Medium ventilation HV o High ventilation Double size o scenario The simulations parameters are follows: Temperature: 10 C, Moisture: 60%, ventilation conditions 1.0 m/s (3.6 km/h), Simulation time: 900 seconds. There are two different areas to be considered in the domain (Fig. 2): (A) Enclosure (Living room) and (B) Open (external conditions) p.5 MATEC Web of Conferences (A) Fire barriers (FB) Floor barriers (WB) Window barriers (B) Thermal insulation (CI) Combustible Insulation similar in type to polyurethane foam (NCI) Non combustible insulation similar in type to rock wool (C) Cavity size and ventilation level 1.0 m/s 2.5 m/s (LV) Low ventilation 7 cm cavity width (MV) Medium ventilation 17 cm cavity width (HV) High ventilation 7 cm cavity + forced air flow Figure 4. Details of the ventilated cavity elements. Geometric configuration and contents of the scenarios The fire scenario consists of a three-storey living space of 4.00 m 4.90 m. Each floor is 2.50 m high and is separated by concrete floors (non-combustible material). The façade cladding material is non-combustible. The scenario is representative of a typical living space with a fire load density p.6 1 st International Seminar for Fire Safety of Facades, Paris (France), Temperature ( C) Temperature ( C) Time (s) Time (s) Without barrier (FB) (WB) Without barrier (FB) (WB) (A) (B) Figure 5. (Top) comparative of temperatures between a scenario without barrier and the two types of barriers studied, for thermocouples 1 (left) and 2 (right). (Bottom) graphics of fire spreading through the façade. (A) With barriers, at time of 300 s. (B) Without barriers, at 250 s and 300 s. approximately of 600 MJßm 2. The characterization of the materials that constitute the furniture is based on some parameters extracted from the database of Ref. [6]. Measurements devices Data on the evolution of the temperatures are recorded through thermocouples located at the height of the parapet of the first floor, both inside and outside. Furthermore, thermocouples are placed inside the chamber to check the temperatures reached (Fig. 3). In order to observe the distribution of temperatures in certain areas of the scenario, chromatic planes of two dimensions are used, as seen in Figures 6 and 7. Ventilated cavity details As indicated in the research objectives, in this study three aspects related to the ventilated cavity are explored. Table 2 and Figure 4 shows the information on each of them. Two sizes of ventilated cavity are studied LV and MV (low and medium ventilation) according to the provisions of CTE DB HE Energy Savings (Appendix E). The third type of ventilation HV (high ventilation) incorporates a forced air flow p.7 MATEC Web of Conferences 800 Temperature (ºC) Time (s) T1 (10 m) T2 (16.50) T3 (16.50) ºC (A) (B) Figure 6. (Top) temperatures recorded by thermocouples located inside the cavity. (Bottom) (A) graphics of flames and smoke through the façade without fire barriers, at 450 s. (B) Temperature distribution for the same situation. RESULTS The results show the great influence of the ventilated cavity in fire spread through the façade, should adequate fire barriers not be employed. Fire barriers In all the cases studied, we observe that is very important to consider the use of fire barriers to prevent the entry and spread of flames into the cavity. It is also observed that fire spread through the cavity is much faster than through the windows. In addition, the probability of fire spread to the upper floors is greater. The comparative of temperature evolution (Fig. 5 top) show peaks at slightly lower temperature on the surface of the façade when using barriers; indicating that the fire plume projected on the façade has a similar behavior in both cases. However, temperatures inside the enclosure are significantly lower when p.8 1 st International Seminar for Fire Safety of Facades, Paris (France), 2013 HRR (KW) Time (s) CI NCI Temperature (ºC) Time (s) CI NCI (A) (B) Figure 7. (Top) comparative of HRR and temperatures (thermocouples 4) between scenarios with combustible and non-combustible insulation. (Bottom) graphics of flame spread and temperature distribution, at 350 s. (A) Combustible insulation CI. (B) Non-combustible insulation NCI. using barriers (FB) (WB). This shows that, preventing the passage of fire through the ventilated cavity decreases significantly the possibility of fire spreading to upper floors. In general, it is observed that both partitioning methods are effective in preventing the passage of fire to the ventilated cavity. However, it should be considered that the barriers FB have the additional ability to limit the passage of flame through the camera, while the barriers WB only limit the input or output of fire through the window frames (or doors). This is an important aspect because the interior of the cavity may reach high temperatures. In the non-combustible insulation scenarios, temperature peaks near 800 C were recorded, being of about 1000 C in the scenarios with combustible insulation. The double size scenario (18 meters) (height reference used by the CTE) which are performed without barriers, shows the ability that may have the fire and smoke to spread through the cavity, even if the insulation is non-combustible, as seen in Figure 6. This result highlights the importance of compartmentalize the ventilated cavity to prevent this type of spread. Because the study is conducted using computational techniques, it is not possible to obtain data on the fire resistance of the elements or on the degradation of materials exposed to flames, but rather their influence on fire dynamics. The potential effectiveness of a fire barrier design can only be fully assessed as a part of a series of large-scale tests. Thermal insulation It is observed that the combustibility characteristics of the thermal insulation material has a significant influence on the intensity and velocity of fire propagation through the cavity as seen in the comparative of HRR and temperatures in the curves of Figure 7 (top) p.9 MATEC Web of Conferences Table 3. Summary of temperature peaks. LV MV HV CI NCI CI NCI NCI C 600 C 550 C 250 C 700 C 750 C 450 C 500 C 900 C 400 C C 600 C 750 C 400 C 830 C 570 C 550 C 500 C 950 C 500 C Once the fire is within the cavity the propagation through the ventilated cavity occurs quickly, regardless of used insulation material. However when this is a combustible material the spread of fire is much more intense and the probability of fire sp
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks