ODBIORNIK /USB/MP3/WMA z interfejsem Bluetooth Bluetooth /USB/MP3/WMA ΔΕΚΤΗΣ - PDF

Description
Bluetooth /USB/MP3/WMA RECEIVER RÉCEPTEUR /USB/MP3/WMA Bluetooth Bluetooth /USB/MP3/WMA-RECEIVER RICEVITORE /USB/MP3/WMA Bluetooth Bluetooth /USB/MP3/WMA-ONTVANGER RECEPTOR Bluetooth /USB/MP3/WMA Bluetooth

Please download to get full document.

View again

of 28
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information
Category:

Letters

Publish on:

Views: 6 | Pages: 28

Extension: PDF | Download: 0

Share
Transcript
Bluetooth /USB/MP3/WMA RECEIVER RÉCEPTEUR /USB/MP3/WMA Bluetooth Bluetooth /USB/MP3/WMA-RECEIVER RICEVITORE /USB/MP3/WMA Bluetooth Bluetooth /USB/MP3/WMA-ONTVANGER RECEPTOR Bluetooth /USB/MP3/WMA Bluetooth /USB/MP3/WMA-RECEIVER ODBIORNIK /USB/MP3/WMA z interfejsem Bluetooth Bluetooth /USB/MP3/WMA ΔΕΚΤΗΣ Contents Thank you for purchasing this Clarion product. Please fully read this owner s manual before operating this equipment. Check the contents of the enclosed warranty card and store it in a safe place with this manual. 1. FEATURES... 3 Expanding Systems PRECAUTIONS... 4 Front Panel / Generalities... 5 USB Port CONTROLS... 6 Operational Panel... 6 Names of Button... 6 Remote Control (RCX004)... 7 Notes of remote control using OPERATIONS... 8 Basic Operations... 8 System Setup... 9 Radio Operations Radio Data System Operations USB Operations ipod & iphone Operations AUX Operations Bluetooth Operations TROUBLE SHOOTING ERROR DISPLAYS SPECIFICATIONS INSTALLATION / WIRE CONNECTION GUIDE 1. FEATURES Built-in Bluetooth Hands free(hfp) and Audio Streaming(A2DP & AVRCP) Compatible with ipod / iphone via USB 4ch RCA Output with HPF/LPF and BEAT-EQ with 3 Band Parametric Equalizer Expanding Systems Expanding audio features 4 Channel Amplifier ipod/iphone (Connect via CCA-748) USB Memory (Connect via CCA-755) Portable Player (Connect via AUX IN Jack) Bluetooth cellular phone Note: The items listed outside of the frames are the commercial products generally sold. CCA-748 and CCA-755: Sold by separately. 3 2. PRECAUTIONS WARNING For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. 1. If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. 2. Do not open the case, disassemble the unit, or lubricate the rotating parts. 3. Made for ipod, and Made for iphone mean that an electronic accessory has been designed to connect specifically to ipod, or iphone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with ipod or iphone may affect wireless performance. iphone and ipod are trademarks of Apple Inc., registered in the U.S. and other countries. MW FM LW TX-1074E-A kHz MHz kHz This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from MSLGP. Bluetooth QD ID No.: B CHINA PN: Front Panel / Generalities For a longer service life, be sure to read the following cautions. Do not allow any liquids on the set from drinks, umbrellas, etc. Doing so may damage the internal circuitry. Do not disassemble or modify the set in any way. Doing so may result in damage. Do not let cigarettes burn the display. Doing so may damage or deform the body. If a problem should occur, have the set inspected at your store of purchase. Cleaning the body Use a soft, dry cloth and gently wipe off the dirt. For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. Do not use benzene, thinner, car cleaner, etc., as these substances may damage the body or cause the paint to peel. Also, leaving rubber or plastic products in contact with the body for long periods of time may cause stains. USB Port The USB memory stick may stick out when inserted,so it may cause danger during driving. When connect USB memory stick to the main unit, please use a USB extension cable (CCA-755). T h e U S B m e m o r y s t i c k s m u s t b e recognized as USB mass storage class to work properly. Some models may not operate correctly. When the memorized data is lost or damaged by any chance, Clarion shall not be liable for any damage. When using an USB memory stick, we recommend that you backup your data stored on it before using a personal computer etc. Data files may be broken when using USB memory sticks in the following situation: When disconnecting the USB memory stick or turning the power off during reading data. When affected static electricity or electric noise. Connect/disconnect the USB memory stick when it is not accessed. Connecting with the computer is not covered. 5 3. CONTROLS Operational Panel [MIC] [CONTROL] [RESET] USB Slot AUX IN Names of Button [CONTROL] Knob Power on (press) Power off (long press - rotate it select POWER OFF - press) Adjust volume level (rotate) Toggle the audio source (press) Previous/Next search (press - left/right ) Select tuner band (press - up)(1sec.) BT mode Terminate call RADIO mode PTY select. AUX mode No function. USB mode Search function ipod mode ipod menu [ MIC ] Hole Internal microphone 6 Remote Control (RCX004) [SRC] Button Toggle the audio source [MUTE] Button Mute the volume [, ] Buttons Preset station up / down Previous / next track Search (long press) [SCN/PS/AS] Button Scan play / Preset scan Auto memory store (long press) [BAND/TOP] Button Select tuner band Top play (long press) [1~6] Buttons [1] Button: Preset station 1. [2] Button: Preset station 2. [3] Button: Preset station 3. [4] Button: Preset station 4. [5] Button: Preset station 5. [6] Button: Preset station 6. [SOUND] Button Sound effect setting [, ] Buttons Volume up / down [ ] Button Play / Pause [TA] Button Traffic announcement [DISP] Button Display switch [PTY/RDM] Button Programme type Random play [AF/RPT] Button Alternative frequency Repeat play [, ] [BAND/TOP] [ ] [, ] [DISP] [1~6] [TA] [SCN/ PS/AS] [AF/RPT] [SOUND] [PTY/RDM] [MUTE] Notes of remote control using Replacing the lithium battery of remote control unit. When the range of the operation of the card remote control becomes short or no functions while operating. Replace the battery with a new lithium battery. Make sure the battery polarity replacement is correct. 1. Pull out the battery holder while pressing the stopper. 2. Insert the button-type battery with the stamped(+) mark facing upward. Insert the battery holder into the remote control. CR (CR 2025) 7 4. OPERATIONS Basic Operations Note: Refer to the diagrams in 3. CONTROLS when reading this chapter. CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Power on / off Notes: Start the engine before using this unit. Be careful about using this unit for a long time without running the engine. If you drain the car s battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Start the engine. The power button / knob illumination on the unit will light up. Engine ON position Volume adjustment Turn the [CONTROL] knob on the front panel. The adjustable range of volume is 0 to 40. CAUTION While driving, keep the volume level at which external sounds can be heard. Playing source selection Press [CONTROL] knob on the front panel repeatedly to choose desired playing source. Notes: Playing source selection means selecting work mode, such as RADIO mode and AUX mode, etc. Display system time Press the [DISP] button on the remote control to switch the display information, system time and playing source. 2. Press the [CONTROL] knob on the front panel to turn on the power under standby mode. The unit goes back to the last status after power on. 3. Press and hold the [CONTROL] knob (center long press) on the front panel, and rotate the [CONTROL] knob choose POWER OFF, then press the [CONTROL] knob on the front panel to turn off the power. Mute Press the [MUTE] button on the remote control to mute the volume from the unit. RESET Note: * When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared. RESET Note: Doing the operation above again or adjusting volume will release muting. 8 CT (Clock Time) display The displayed clock data is based on the CT (clock time) data in the RDS signal. System Setup At all mode, press and hold [CONTROL] knob (center long press), and rotate the [CONTROL] knob choose ADJUST, then press the [CONTROL] knob to enter system setup. Press [CONTROL] knob (left / right) to select options, rotate the [CONTROL] knob to adjust. DX/LO (RADIO mode) Rotate the [CONTROL] knob to choose radio local or distant at RADIO mode. LO: Only stations with strong signal can be received. DX: Stations with strong and weak signals can be received. AF: ON/OFF (RADIO mode) Rotate the [CONTROL] knob to choose AF ON or OFF. ON: AF indicator appears in the display lights and AF function turns on. OFF: AF indicator disappears in the display and AF function turns off. REG: ON/OFF (RADIO mode AF on) Rotate the [CONTROL] knob to choose REG ON or OFF. ON: REG indicator appears in the display lights and Regional function turns on. OFF: REG indicator disappears in the display and Regional function turns off. TA: ON/OFF Rotate the [CONTROL] knob to choose TA ON or OFF. ON: TA indicator appears in the display lights and TA function turns on. OFF: TA indicator disappears in the display and TA function turns off. PTY (Programme Type) MODE (RADIO mode) Press [CONTROL] knob, then rotate the [CONTROL] knob to select PTY type, press the [CONTROL] knob, the unit begin searching. PTY type: NEWS - AFFAIRS - INFO - SPORT - EDUCATE - DRAMA - CULTURE - SCIENCE - VARIED - POP M - ROCK M - EASY M - LIGHT M - CLASSICS - OTHER M - WEATHER - FINANCE - CHILDREN - SOCIAL - RELIGION - PHONE IN - TRAVEL - LEISURE - JAZZ - COUNTRY - NATION M - OLDIES - FOLK M - DOCUMENT - TEST - ALARM PCH MEMO (RADIO mode) Rotate the [CONTROL] knob to choose PCH 1 / PCH 2 / PCH 3 / PCH 4 / PCH 5 or PCH 6, press and hold [CONTROL] knob (center long press) to store it in the memory. AUX SENS (AUX mode) Rotate the [CONTROL] knob to choose AUX input sensitivity LOW, MID or HIGH at AUX mode. AUTO CON (BT mode): ON/OFF Rotate the [CONTROL] knob to choose AUTO CON ON or OFF. PIN CODE Press the [CONTROL] knob, rotate the [CONTROL] knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Press the [CONTROL] knob to confirm. The PIN CODE default setting is MIC SEL (BT mode) Rotate the [CONTROL] knob to choose microphone EXTERNAL or INTERNAL. MIC GAIN (BT mode) Rotate the [CONTROL] knob to choose Mic gain: 1, 2, 3, 4, 5. You can change the gain of MIC when a telephone partner cannot hear your voice. SCRN SVR: ON/OFF Rotate the [CONTROL] knob to choose SCRN SVR (screen saver) ON or OFF. SCROLL: ON/OFF For track information that is longer than the display panel: When SCROLL is ON, the LCD will display ID3 TAG information cyclely, e.g.: TRACK- F O L D E R - F I L E - A L B U M - T I T L E - ARTIST- TRACK- ... When SCROLL is OFF, the LCD will display 9 System Setup one of the ID3 TAG information, the default is TRACK, but user can adjust it to other ID3 TAG information by pressing [DISP] button on the remote control. S-CTRL (ipod mode) : ON/OFF Rotate the [CONTROL] knob to choose S-CTRL (Simple control) ON or OFF. * Refer to P15. DIMMER: ON/OFF Rotate the [CONTROL] knob to choose DIMMER ON or OFF. ON: LCD dimmer is active when small light of vehicle is turned ON. OFF: LCD always maximum brightness regardless of the vehicle small light. REAR/S-W Rotate the [CONTROL] knob to choose REAR or S-WOOFER(SUB-WOOFER). SOUND Press the [CONTROL] knob to enter sound effect setting mode. First press shows current EQ. Rotate the [CONTROL] knob to choose BEAT EQ in this order: OFF - B-BOOST - IMPACT - EXCITE - CUSTOM To change CUSTOM setting, and press the [CONTROL] knob (center), then press [CONTROL] knob (right/left) to select EQ effects including: BASS-G - BASS-F - BASS-Q - MID-G - MID-F - MID-Q - TREBLE-G - TREBLE-F, rotate the [CONTROL] knob to select a value. BASS-G / MID-G / TREBLE-G: (-7)- (+7) BASS-F: 50 / 100 / 200 BASS-Q : 0.7 / 1.0 / 1.4 / 2.0 MID-F: 500 / 1 K / 2 K MID-Q: 0.7 / 1.0 / 1.4 / 2.0 TREBLE-F: 5 K / 10 K / 15 K TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0 SW PHASE Rotate the [CONTROL] knob to choose SUB- WOOFER phase REVERSE or NORMAL. BEEP: ON/OFF Rotate the [CONTROL] knob to choose button beep sound ON or OFF. Then press the [CONTROL] knob (left / right) to select USER preset including: BALANCE - FADER - M-B EX - HPF(high pass filter) - LPF(low pass filter) - S-W VOL (Subwoofer Volume), rotate the [CONTROL] knob to select a value. BALANCE:LEFT 1-7- CENTER- RIGHT 1-7 FADER:FRONT 1-7- CENTER- REAR 1-7 M-B EX: ON/OFF HPF: THROUGH/60/90/120 LPF: THROUGH/60/90/120 SUBW VOL: (-6)-(+6) Radio Operations Select tuner as playing source Press the [CONTROL] knob or [SRC] button on the remote control once or more to enter RADIO mode. Select one radio band Press and hold the [CONTROL] knob (up long press) on the panel or [BAND/TOP] button on the remote control to select one radio band among FM1, FM2, FM3, MW and LW. Manual tuning During manual tuning, the frequency will be changed in steps. Press the [CONTROL] knob (left / right) on the panel or [, ] buttons on the remote control to tune in a higher / lower station. Auto tuning Press and hold the [CONTROL] knob (left / right) on the panel or [, ] buttons on the remote control to seek a higher / lower station. 10 Radio Operations To stop searching, repeat the operation above or press other buttons having radio functions. Note: When a station is received, searching stops and the station is played. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [SCN/PS/AS] button on the remote control. 2. When a desired station is tuned in, press the [SCN/PS/AS] button on the remote control again to continue receiving that station. Note: Be careful not to press and hold the [SCN/ PS/AS] button, otherwise the auto store function is engaged and the unit starts storing stations. Auto store Only stations with sufficient signal strength will be detected and stored in the memory. Press and hold the [SCN/PS/AS] button on the remote control to start automatic station search. To stop auto store, press other buttons having radio functions. Notes: 1. After auto store, the previous stored stations will be overwritten. 2. The unit has 5 bands, such as FM1, FM2, FM3, MW, LW. FM3 and MW, LW can store by AS function. Each bands can store 6 stations, FZ501E can store 30 stations in total. Manual store When one expected radio station has been detected, press and hold number button on the remote control 1-6 to store it in the memory. Recall the stored stations Press one numeric button among 1 to 6 on the remote control to select the corresponding stored station. Press the [CONTROL] knob (up / down) on the panel to tune in a higher / lower station. Local seeking When LOCAL seeking is on, only those radio stations with strong radio signal could be received. To open or close LOCAL function, set to system setup by long pressing [CONTROL] knob on the front panel, then press the [CONTROL] knob(left / right) repeatedly until LO or DX displays on the screen, rotate the [CONTROL] knob to select Local or Distant mode. Note: The number of radio stations that can be received will decrease after the local seeking mode is on. Radio Data System Operations Radio Data System This unit has a built-in Radio Data System decoder system that supports broadcast stations transmitting Radio Data System data. When using the Radio Data System function, always set the radio to FM mode. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. * The factory default setting is ON. 1. In ADJ mode(radio mode), press [CONTROL] knob (left / right) to select options. 2. Press the [CONTROL] knob (left / right) to select AF. 11 Radio Data System Operations 3. Rotate the [CONTROL] knob to select ON or OFF. AF ON: AF indicator appears in the display and AF function turns on. AF OFF: AF indicator disappears in the display and AF function turns off. REG (Regional programme) function When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received. * The factory default setting is ON. Notes: This function is disabled when a national station such as BBC R2 is being received. The REG function ON/OFF setting is valid when the AF function is ON. 1. In ADJ mode, press [CONTROL] knob (left / right) to select options. 2. Press the [CONTROL] knob (left / right) to select REG. 3. Rotate the [CONTROL] knob to select ON or OFF. Manually tuning a regional station in the same network 1. This function is valid when the AF function is ON and the REG function is OFF. Note: This function can be used when a regional broadcast of the same network is received. Setting the TA standby mode If you press the [TA] button on the remote control (in ADJ mode, press [CONTROL] knob (left / right) to select options) TA lights in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, TRAF INF appears in the display. If you press the [TA] button on the remote control while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. Cancelling the TA standby mode As TA lights in the display, press the [TA] button on the remote control. The TA in the display goes off and the TA standby mode is cancelled. PTY (Programme Type) This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio. * Some countries do not yet have PTY broadcast. * In the TA standby mode, a TP station has priority over a PTY broadcast station. Selecting PTY In ADJ mode, press [CONTROL] knob (left / right) to select options, then rotate the [CONTROL] knob to select PTY type, press the [CONTROL] knob, the unit begin searching. TA (Traffic Announcement) In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also available. * This function can only be used when TP appears in the display. When TP appears, this means that the Radio Data System broadcast station being received has traffic announcement programmes. 12 USB Operations 1. Move the cover of the USB slot to the left. Insert a USB cable (CCA-755) into the USB slot. Insert a USB device into the USB cable. When connecting a USB device, the unit will read the files automatically. 2. To remove the USB device, you should first select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device. Move the cover to the right. Pausing play 1. Press the [ ] button on the remote control to pause play. PAUSE appears in the display. 2. To resume MP3/WMA play, press the [ ] button on the remote control again. Selecting a track Track-up 1. Press the [CONTROL] knob (right) on the panel or [ ] button on the remote control to move to the beginning of the next track. 2. Each time you press the [CONTROL] knob (right) on the panel or [ ] button on the remote control, the track advances to the beginning of the next track. Track-down 1. Press the [CONTROL] knob (left) on the panel or [ ] button on the remote control to move back to the beginning of the current track. 2. Press the [CONTROL] knob (left) on the panel or [ ] button on the remote control twice to move back to the beginning of the previous track. Fast-forward/Fast-reverse Fast-forward Press and hold the [CONTROL] knob (right) on the
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks