EN FREEZER / REFRIGERATOR FR RÉFRIGÉRATEUR / CONGÉLATEUR ES REFRIGERADOR CON CONGELADOR - PDF

Description
EN FREEZER / REFRIGERATOR FR RÉFRIGÉRATEUR / CONGÉLATEUR ES REFRIGERADOR CON CONGELADOR USE AND CARE GUIDE GUIDE D UTILISATION ET D ENTRETIEN GUIA DE USO Y CUIDADO March Finding Information

Please download to get full document.

View again

of 27
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information
Category:

School Work

Publish on:

Views: 7 | Pages: 27

Extension: PDF | Download: 0

Share
Transcript
EN FREEZER / REFRIGERATOR FR RÉFRIGÉRATEUR / CONGÉLATEUR ES REFRIGERADOR CON CONGELADOR USE AND CARE GUIDE GUIDE D UTILISATION ET D ENTRETIEN GUIA DE USO Y CUIDADO March 2012 2 Finding Information Please read and save this guide Thank you for choosing Electrolux, our new premium brand in home appliances. This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance. Keep a record for quick reference Table of contents Finding Information...2 Safety...3 Feature Overview...5 Installation...6 Removing the Doors...10 Installing Door Handles...12 Purchase date Electrolux model number Electrolux serial number Registering your product with Electrolux enhances our ability to serve you. You can register online at www. electroluxappliances.com or by sending your Product Registration Card in the mail. Questions? For toll-free telephone support in the U.S. and Canada: ELECTROLUX ( ) For online support and product information visit Connecting the Water Supply...13 Controls...14 Automatic Ice & Water Maker/Dispenser...19 Automatic Ice Maker - Freezer...21 Storage Features...22 Storing Food and Saving Energy...27 Normal Operating Sounds & Sights...28 Changing the Water and Air Filters...29 Care and Cleaning...31 Solutions to Common Problems...34 Warranty...38 Doors Handles are secure and tight Door seals completely to cabinet on all sides Freezer drawer is level across top Leveling Refrigerator is level, side-to-side and tilted ¼ in. (6 mm) front-to-back Toe grille is properly attached to refrigerator Cabinet is setting solid on all corners Electrical Power House power turned on Refrigerator plugged in Installation Checklist Ice Maker House water supply connected to refrigerator No water leaks present at all connections - recheck in 24 hours Ice maker is turned ON Ice & water dispenser operates correctly Front filter must be flush with filter housing (select models) Final Checks Shipping material removed Fresh food and freezer temperatures set Crisper humidity controls set Registration card sent in Safety 3 Important safety instructions Safety Precautions Do not attempt to install or operate your unit until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a Danger, Warning, or Caution based on the risk type. Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. IMPORTANT Indicates installation, operation, or maintenance information which is important but not hazard-related. General Safety WARNING Please read all safety instructions before using your new refrigerator. Remove all staples from the carton to avoid injury. Staples can also damage finishes if they come in contact with other appliances or furniture. Child Safety Packing Materials: Packing cartons covered with rugs, bedspreads, plastic sheets, or stretch wrap may become airtight chambers and can quickly cause suffocation. Destroy or recycle the product s carton, plastic bags, and any other exterior wrapping material immediately after the refrigerator is unpacked. Children should never play with these items. Child Entrapment and Suffocation: These problems are not limited to the past. Whether junked, abandoned, or temporarily stored (even for a few hours), unattended refrigerators and freezers are dangerous. Please take the precautions listed below. Proper Disposal of Refrigerators/Freezers We strongly encourage responsible appliance recycling/ disposal methods. Check with your utility company or visit for more information on recycling your old refrigerator. Before you recycle or dispose of your old refrigerator/ freezer: Remove the doors. Leave the shelves and baskets in place so children may not easily climb inside. Have refrigerant and compressor oil removed by a qualified service technician. Do not store or use gasoline or other flammable liquids near this or any other appliance. Read product labels for warnings regarding flammability and other hazards. Do not operate the refrigerator in the presence of explosive fumes. Avoid contact with any moving parts of the automatic ice maker. 4 Safety Electrical information WARNING You must follow these guidelines to ensure that your refrigerator s safety mechanisms are operating correctly. The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz, AC-only non-gfci electric outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three-prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician. Do not use an extension cord or adapter plug. If the power cord is damaged, it should be replaced by the manufacturer, service technician, or a qualified person. Never unplug the refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle to prevent damaging the power cord. To avoid electrical shock, unplug the refrigerator before cleaning and before replacing a light bulb or LED light. Performance may be affected if the voltage varies by 10% or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is not covered under your warranty. Do not plug the unit into an outlet controlled by a wall switch or pull cord to prevent the refrigerator from being turned off accidentally. IMPORTANT To turn off power to your refrigerator, unplug the power cord from the wall outlet. Feature Overview 5 Understanding features and terms Your Electrolux refrigerator is designed for optimal convenience and storage flexibility. The illustration below is provided to assist you with familiarizing yourself with product features and terminology. *Features may vary according to model. Model is shown without freezer drawer cover. *Air Filter Ice Bin *Incandescent Light Flipper Guide *LED Light Ice Maker Dairy Compartment *Air Filter Flipper Mullion Luxury-Design TM Shelves Luxury-Design TM Shelves Crisper Drawer Crisper Drawer *Special Items Rack (inside PTD) *Tilt Can Bin LED Light Water Filter *Adjustable Hinges *LED Light *Perfect Temp TM Drawer (PTD) or Deli Drawer (with humidity slides) Freezer Baskets *Freezer Ice maker Toe Grille IMPORTANT Features not included with your refrigerator can be purchased at or by calling *Wire Tilt-Out Shelf (inside freezer drawer) 6 Installation Required Tools You will need the following tools: This Use & Care Guide provides general installation and operating instructions for your model. We recommend using a service or kitchen contracting professional to install your refrigerator. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps. Location Choose a place that is near a grounded, non- GFCI, electrical outlet. Do Not use an extension cord or an adapter plug. If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher, or other heat sources. The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator. Consider water supply availability for models equipped with an automatic ice maker. CAUTION DO NOT install the refrigerator where the temperature will drop below 55 F (13 C) or rise above 110 F (43 C). The compressor will not be able to maintain proper temperatures inside the refrigerator. DO NOT block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator. Installation Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections: Sides & Top Back Door opening ³ ₈ inch (9.5 mm) 1 inch (25.4 mm) If your refrigerator is placed with the door hinge against a wall, you may have to allow additional space so the door can be opened wider. The refrigerator doors are designed to shut by themselves within a 20-degree opening. Your refrigerator should be positioned to allow easy access to a counter when removing food. For best use of refrigerator drawers and freezer baskets, the refrigerator should be in a position where both can be fully opened. Installation 7 Leveling Freezer Drawer (if necessary) 1 Check gasket seal around top, bottom, and sides of freezer drawer. 2 If gasket is not sealed, open drawer and slightly loosen four (4) drawer screws (two (2) on each side) to allow drawer to rotate. 3 Close drawer and recheck the seal on the gasket (A). Open the drawer grabbing by the sides in the center (B). Be careful not to rotate the drawer. To level the cabinet using the front rollers: 1 Slightly open freezer drawer. Lift the toe grille and gently pull forward (see illustration). 2 You can raise or lower each door. Use a ³ ₈ inch socket wrench to turn the adjustment screws (1 per side). Remove Hex Head Drawer Screw Remove Hex Head Drawer Screw Do Not Remove Other Screws Do Not Remove Other Screws Remove Hex Head Drawer Screw 4 Tighten four (4) drawer screws. 5 Recheck gasket seal. Remove Hex Head Drawer Screw To raise: turn adjustment screw clockwise. To lower: turn adjustment screw counterclockwise. 3 Ensure both doors are bind-free with their seals touching the cabinet on all four sides and that cabinet is stable. 4 After unit is leveled, lower anti-tip leg until it contacts the floor. Push Against Freezer Drawer Grab Drawer At Center From Both Sides Then Pull Drawer Out Door Door A B Raise Level Refrigerator & Adjust Doors (if necessary) Guidelines for final positioning of your refrigerator: All four corners of the cabinet must rest firmly on the floor. The sides should tilt 1 /4 inch (6 mm) from front to back (to ensure that doors close and seal properly). Doors should align with each other and be level. Most of these conditions can be met by raising or lowering the adjustable front rollers. Anti-tip Leg Lower 5 Install the toe grille by fitting into place. 8 Installation To adjust the door stop: Door stop is adjustable between 85 to 145 degrees. 5 Retighten screw. View shown is looking up at the bottom of the refrigerator door. Adjustable Door Stop 1 Open door to provide access to screw. 2 Loosen screw. 3 Adjust door to desired location. B Retighten Screw 6 Ensure door stops in desired location before resuming normal use. To level the doors using the adjustable lower hinge (select models): 1 Remove all food items from door bins on door being adjusted. 2 Open doors to 90 degrees. 3 Loosen or remove screw. Loosen or Remove Screw Open A Door 90 degrees Bottom of Door Adjusting Door 4 Rotate door stop until it makes contact with the lower hinge. Loosen/Remove Screw (where applicable) Adjustable hinge should only be used after doors have been leveled with rollers. Installation 9 4 Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counterclockwise (when viewed from the bottom). To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Adjusting Flipper Mullion Screw Raising/Lowering Door 5 Retighten the screw (where applicable), ensuring it is between the spokes of the washer. Screw will not be tight, just insert until it is flush with the hinge. 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Screw (where applicable) If after adjusting doors higher the door makes a popping/clicking sound, remove screw and replace with the longer one supplied in the handle package. Adjusting Flipper Mullion Height 3 Retighten screw. 10 Removing the Doors Getting through narrow spaces If your refrigerator will not fit through an entrance area, you can remove the doors. Check first by measuring the entrance. To prepare for removing the doors: 1 Make sure the electrical power cord is unplugged from the wall outlet. 2 Open the freezer drawer and remove the toe grille (see Installation section). 3 Remove any food from the door shelves and close the doors. To remove the top hinge covers: 1 Remove the two (2) screws from each cover over the top door hinges. 2 Lift inside edge of hinge cover and tilt back. To remove the refrigerator doors: 1 Trace lightly around the door s top hinges with a pencil. This makes reinstallation easier. 2 Disconnect the harness by grasping both sides of the connector firmly, depress the latch, and pull apart. Remove the two (2) screws from the top hinge. Lift the door off of the bottom hinge and set it aside. 3 Detach the water tube from the connector located behind the refrigerator and pull the tube back out to the front of the unit. The connector releases when you press inward on the outer sleeve while pushing the tube toward the connector then while continuing to hold in the sleeve, pull the tube away. Use care while pulling the water tube from the unit to be sure you do not kink it. DO NOT remove the ground screw from hinge. 5 Removing the Doors 11 You will be pulling approximately five (5) feet of water tube from the back of the refrigerator. Installing Freezer Drawer 1 With lower slides pulled out, hang drawer onto slide brackets ensuring pins on each side are fully inserted into slots on each side. 4 Unscrew the three (3) lower hinge screws and hinge if necessary. To reinstall the right door, reverse the above steps. Lower Hinge Removal Drawer Assembly Fully Extend Drawer Slides Pin Cabinet Slot Once both doors are in place, ensure they are aligned with each other and level (Please see the Installation section for more details), and replace the top hinge cover. CAUTION Be sure doors are set aside in a secure position where they cannot fall and cause personal injury, or damage to the doors or handles. Removing Freezer Drawer 1 Open freezer drawer. 2 Remove drawer screws on right and left sides (two (2) screws on each side). Remove Hex Head Drawer Screw When reinserting the water tube and replacing the top hinge cover, use care to be sure you do not kink the tube. Remove Hex Head Drawer Screw 2 Reinstall four (4) drawer screws (two (2) per side), tighten down, and close drawer (C). Install Hex Head Drawer Screws 3 Check gasket seal around top, bottom, and sides of freezer drawer. 4 If gasket is not sealed, open drawer and slightly loosen four (4) drawer screws (two (2) on each side) to allow drawer to rotate. 5 Close drawer and recheck the seal on the gasket (A). Open the drawer grabbing by the sides in the center (B). Be careful not to rotate the drawer. Do Not Remove Other Screws Do Not Remove Other Screws Push Against Freezer Drawer Grab Drawer At Center From Both Sides Then Pull Drawer Out Remove Hex Head Drawer Screw Remove Hex Head Drawer Screw CAUTION A B Drawer is heavy. Use caution when lifting. 6 Tighten four (4) drawer screws. 7 Recheck gasket seal. 3 Lift drawer up and out to remove. 8 Install the toe grille by fitting into place. 12 Installing Door Handles Door Handle Mounting Instructions 1 Remove handles from protective packaging. 2 Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (C) with supplied Allen wrench. 4 Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door. 5 Position freezer handle end caps over left and right preinstalled shoulder bolts that are fastened to the drawer, ensuring the holes for the set screws are facing down. 6 While holding handle firmly against drawer, fasten left and right Allen set screws (C) with supplied Allen wrench. Mounting Refrigerator Handles Mounting Freezer Handle To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened. CAUTION Wear gloves and safety goggles. Use extreme CAUTION when installing these handles. Connecting the Water Supply 13 WARNING To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator. CAUTION To Avoid Property Damage: Copper or Stainless Steel braided tubing is recommended for the water supply line. Water supply tubing made of ¼ inch plastic is not recommended to be used. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line. DO NOT install water supply tubing in areas where temperatures fall below freezing. Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly. IMPORTANT Ensure that your water supply line connections comply with all local plumbing codes. Before installing the water supply line, you will need: 1. Basic Tools: adjustable wrench, flat-blade screwdriver, and Phillips TM screwdriver 2. Access to a household cold water line with water pressure between 30 and 100 psi. 3. A water supply line made of ¼ inch (6 mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown). 4. A shutoff valve to connect the water supply line to your household water system. DO NOT use a selfpiercing type shutoff valve. 5. Do NOT reuse compression fitting or use thread seal tape. 6. A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve. To connect water supply line to ice maker inlet valve: 1. Disconnect refrigerator from electric power source. 2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve. 3. Remove plastic cap from water valve inlet and discard cap. 4. If you use copper tubing - Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it will go (¼ inch / 6 mm). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over- tighten. See Figure 1. If you use stainless steel tubing - The nut and ferrule are already assembled on the tubing. Slide compression nut onto valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over- tighten. See Figure With steel clamp and screw, secure water supply line (copper tubing only) to rear panel of refrigerator as shown. 6. Coil excess water supply line (copper tubing only), about 2½ turns, behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface. 7. Turn ON water supply at shutoff valve and tighten any connections that leak. 8. Reconnect refrigerator to electrical power source. 9. To turn ice maker on, lower wire signal arm (freezer ice maker) or
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks