COPY. English. Français. Español. HD Camcorder Instruction Manual. Caméscope HD Manuel d'instruction. Videocámara HD Manual de Instrucciones - PDF

PUB. DIM HD Camcorder Instruction Manual Caméscope HD Manuel d'instruction Videocámara HD Manual de Instrucciones English Français Español Introduction Important Usage Instructions WARNING! TO

Please download to get full document.

View again

of 191
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Medicine, Science & Technology

Publish on:

Views: 31 | Pages: 191

Extension: PDF | Download: 0

PUB. DIM HD Camcorder Instruction Manual Caméscope HD Manuel d'instruction Videocámara HD Manual de Instrucciones English Français Español Introduction Important Usage Instructions WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. RIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. HD Camcorder, VIXIA HF S10 A / VIXIA HF S100 A systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. The cable with the ferrite core provided with the digital video camcorder must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516) CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. 2 CAUTION: Danger of explosion if the wrong type of battery pack is attached. Use only the same type of battery pack. Do not expose battery pack to excessive heat such as the inside of a car under direct sunlight, fire, etc. Important Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. 3 IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word product refers to the Canon HD Camcorder VIXIA HF S10 A / VIXIA HF S100 A and all its accessories. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 9 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10 Only use attachments/accessories specified by the manufacturer. 11 Unplug this apparatus during lightning storms or when unused for long periods of time. 12 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13 Read Instructions All the safety and operating instructions should be read before the product is operated. 14 Retain Instructions The safety and operating instructions should be retained for future reference. 15 Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 16 Follow Instructions All operating and maintenance instructions should be followed. 17 Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. The product should be cleaned only as recommended in this manual. 18 Accessories Do not use accessories not recommended in this manual as they may be hazardous. 19 Avoid magnetic or electric fields Do not use the camera close to TV transmitters, portable communication devices or other sources of electric or magnetic radiation. They may cause picture interference, or permanently damage the camera. 20 Water and Moisture Hazard of electric shock Do not use this product near water or in rainy/moist situations. 4 21 Placing or Moving Do not place on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 22 Power Sources The CA-570 Compact Power Adapter should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. Regarding other power sources such as battery power, refer to instructions in this manual. 23 Polarization The CA-570 Compact Power Adapter is equipped with a polarized 2-prong plug (a plug having one blade wider than the other). The 2-prong polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 24 Power Cord Protection Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to plugs and the point from which the cords exit the product. 25 Outdoor Antenna Grounding If an Fig. 1 outside antenna is connected to the product, be sure the antenna is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI / NFPA No , provides information with respect to proper grounding of the mast and ELECTRIC SERVICE supporting structure, grounding of EQUIPMENT the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure 1. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE GROUND CLAMP NEC - NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION ) GROUNDING CONDUCTORS (NEC SECTION ) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) 26 Lightning For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect the antenna. This will prevent damage to the product due to lightning and powerline surges. 27 Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 28 Objects and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Be careful not to spill liquid of any kind onto the product. 29 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 5 30 Damage Requiring Service Disconnect this product from the wall outlet and all power sources including battery, and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have fallen into, the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally even if you follow the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or the cabinet has been damaged. f. When the product exhibits a distinct change in performance. This indicates a need for service. 31 Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts that are specified by Canon or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 32 Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating order. 33 Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. When replacement of the power supply is required, please return it to the responsible nearest Canon Service Center and please replace it with the same type number CA-570. The Adapter can be used with a power supply between 100 and 240 V AC. For areas where 120 V AC power is not used, you will need a special plug adapter. Contact your nearest Canon Service Center for further information. This Class B digital apparatus complies with Canadian ICES Online product registration for U.S.A. Customers only. Register your product online at Protect your product We will keep the model number and date of purchase of your new Canon product on file to help you refer to this information in the event of an insurance claim such as loss or theft. Receive information on new products and promotions Upon your request, we will send you information on Canon new products and promotions. The serial number of this product can be found at the battery attachment unit of the camcorder. Write down the number and other information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase: Model Name: VIXIA HF S10 A / Purchased From: VIXIA HF S100 A Dealer Address: Serial No.: Dealer Phone No.: Trademark Acknowledgements The SD logo is a trademark. The SDHC logo is a trademark. Microsoft, Windows and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. x.v.color and the x.v.color logo are trademarks. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. AVCHD and the AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation. Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies. This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and noncommercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard. About the music files License number: R Composer: Keita Miyahara Track names: The new legend, Speed rock, Amazing story, Hit the ceiling, The techno light. 7 Enjoying High-Definition Video with your Camcorder Preserve your most treasured memories, be it unforgettable scenery or cherished moments spent with family and friends, with high-definition video recordings of a quality second only to actually being there. What is High-Definition Video? 1,080 lines Your camcorder features a full high-definition image sensor (Full HD CMOS) that captures video at a resolution of 1,920 x 1,080 pixels 1. This results in video recordings of unparalleled high quality, fine detail and lifelike vivid colors. How does full high definition compare with standard-definition TV broadcasts? 6 Approximately 6 times the number of pixels. Capture the finest detail, like the movement or shine of a single strand of hair 2 More than twice the number of scanning lines. Full HD 1080 refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels (scanning lines). 1 Video is recorded at this resolution only when the recording mode is set to MXP or FXP mode. In other recording modes, the picture is recorded at 1,440 x 1,080 pixels. 8 What are the advantages of flash memory? Your videos and photos are recorded in the built-in memory ( only) or on commercially available SD/SDHC memory cards 2 using AVCHD specifications 3. Recording on flash memory means that there are no moving parts in the recorder unit of the camcorder. To you, it means a camcorder that is smaller, lighter and faster. In fact, using the Quick Start function ( 48) you can open the LCD panel and start recording within approximately one second. Any New Functions? Pre-recording When pre-recording ( 68) is activated, the camcorder starts recording video continuously into a temporary 3-second memory. When you press the START/STOP button, the scene recorded will have started 3 seconds before you started shooting. This is especially useful when it is difficult to predict when to start recording. Face Detection With face detection ( 72), have the camcorder automatically detect people's faces and use this information to adjust the focus and set the best exposure and color control settings for beautiful videos and photos. Video Snapshot Discover a new fun way to shoot video with video snapshot scenes ( 65). Shoot short (approx. 4-second) scenes and arrange them into a video clip set to your favorite background music. Cinema Mode Give your recordings a cinematic look by using the [ Cine Mode] recording program ( 64) with the 24 fps progressive frame rate. 2 For details about memory cards that can be used with this camcorder refer to Using a Memory Card ( 41). 3 AVCHD is the new standard for recording high-definition video. With AVCHD specifications, the video signal is recorded using MPEG-4 AVC/H.264 compression and the audio signal is recorded in Dolby Digital. 9 Can I play back my high-definition video on other devices? Needless to say, you can connect your camcorder to an HDTV to enjoy your recordings with family and friends ( 124). You also have the following options: You can easily play back video recorded on the memory card by inserting the memory card directly into AVCHD-compatible TV sets and HDD or DVD recorders that feature an SD/SDHC memory card slot 4. For details, refer to the instruction manual of your TV or digital video recorder. You can play back AVCHD discs of your recordings created using the optional DW-100 DVD Burner ( 126) on the DVD Burner itself or on AVCHD-compatible DVD players or Blu-ray Disc players 5. 4 Depending on the device used, correct playback may not be possible even if the device is AVCHD-compatible. In such case, play back the recordings on the memory card using the camcorder. 5 AVCHD discs containing scenes recorded in MXP mode cannot be created with the optional DW-100 DVD burner. Use the software on the supplied Video Tools CD-ROM to back up such scenes. 10 11 Table of contents Introduction 8 Enjoying High-Definition Video with your Camcorder 16 About this Manual 18 Getting to Know the Camcorder 18 Supplied Accessories and CD-ROMs 20 Names of Parts 23 Screen Displays Preparations 27 Getting Started 27 Charging the Battery Pack 29 Preparing the Wireless Controller and Accessories 31 Adjusting the Position and Brightness of the LCD Screen 33 Basic Operation of the Camcorder 33 Operating Modes 35 Joystick and Joystick Guide 35 Using the Menus 38 First Time Settings 38 Setting the Date and Time 39 Changing the Language 39 Changing the Time Zone 40 Using a Memory Card 40 Memory Cards Compatible for Use with the Camcorder 41 Inserting and Removing a Memory Card 42 Selecting the Memory for the Recordings 42 Initializing the Built-in Memory ( only) or Memory Card 12 Table of contents Video 44 Basic Recording 44 Shooting Video 45 Selecting the Video Quality (Recording Mode) 47 Zooming 48 Quick Start Function 49 Basic Playback 49 Playing Back the Video 51 Selecting what Recordings to Play Back 52 Searching for Scenes 54 Selecting the Playback Starting Point 57 Pre-selecting Recordings from the Index Screen 58 Deleting Scenes 60 Advanced Functions 60 Special Scene Recording Programs 62 Changing the Shutter Speed and Aperture 64 Cinema Mode: Giving a Cinematic Look to your Recordings 64 Mini Video Light 65 Video Snapshot 68 Pre-recording Function 69 Self Timer 70 Manual Exposure Adjustment and Automatic Backlight Correction 71 Manual Focus Adjustment 72 Face Detection 74 White Balance 76 Image Effects 77 Digital Effects 78 On-Screen Displays and Data Code 79 Digital Tele-Converter 80 Audio Recording Level 81 Using Headphones 83 Using the Mini Advanced Shoe 84 Using an External Microphone 85 Using the Custom Key and Dial Table of contents 13 86 Playlist and Scene Operations 86 Dividing Scenes 87 Editing the Playlist: Adding, Deleting, Moving and Playing Back 91 Copying Scenes Photos 93 Basic Recording 93 Taking Photos 94 Selecting Photo Size and Quality 95 Deleting a Photo Right After Recording It 96 Basic Playback 96 Viewing Photos 97 Deleting Photos 99 Magnifying Photos during Playback 100 Additional Functions 100 Flash 102 Drive Mode: Continuous Shooting and Exposure Bracketing 103 Taking Photos while Recording Movies (Simultaneous Recording) 104 Light Metering Mode 104 Slideshow 105 Rotating Photos 105 Histogram Display 106 Capturing Photos from the Playback Scene 107 Protecting Photos Orders 117 Print 108 Copying Photos 111 Printing Photos 111 Printing Photos (Direct Print) 113 Selecting the Print Settings 116 Trimming Settings 14 Table of contents External Connections 120 Terminals on the Camcorder 121 Connection Diagrams 124 Play
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks