CAUTION/PRECAUCIÓN. Group 2 Herbicide KEEP OUT OF REACH OF CHILDREN. Net Contents: - PDF

Description
Group 2 Herbicide For use on alfalfa, beans (dry), chicory, clover grown for seed, edamame, lima bean (succulent), peas (dry), pea (English), snap bean, and soybean Active Ingredient: ammonium salt of

Please download to get full document.

View again

of 23
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information
Category:

Math & Engineering

Publish on:

Views: 15 | Pages: 23

Extension: PDF | Download: 0

Share
Transcript
Group 2 Herbicide For use on alfalfa, beans (dry), chicory, clover grown for seed, edamame, lima bean (succulent), peas (dry), pea (English), snap bean, and soybean Active Ingredient: ammonium salt of imazamox: 2-[4,5-dihydro-4-methyl-4-(1-methylethyl)- 5-oxo-1H-imidazol-2-yl]-5-(methoxymethyl)-3-pyridinecarboxylic acid* % Other Ingredients: % Total: % * Equivalent to 11.4% 2-[4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-(methoxymethyl)-3- pyridinecarboxylic acid 1 gallon contains 1.0 pound of active ingredient as the free acid. EPA Reg. No EPA Est. No. KEEP OUT OF REACH OF CHILDREN CAUTION/PRECAUCIÓN Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this label, find someone to explain it to you in detail.) See inside for complete First Aid, Precautionary Statements, Directions For Use, Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions. In case of an emergency endangering life or property involving this product, call day or night HELP (4357). Net Contents: BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709 If on skin or clothing If in eyes If inhaled FIRST AID Take off contaminated clothing. Rinse skin immediately with plenty of water for 15 to 20 minutes. Call a poison control center or doctor for treatment advice. Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes. Remove contact lenses, if present, after first 5 minutes; then continue rinsing eyes. Call a poison control center or doctor for treatment advice. Move person to fresh air. If person is not breathing, call 911 or an ambulance; then give artificial respiration, preferably mouth to mouth if possible. Call a poison control center or doctor for further treatment advice. HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact BASF Corporation for emergency medical treatment information: HELP (4357). Precautionary Statements Hazards to Humans and Domestic Animals CAUTION. Harmful if absorbed through skin or inhaled. Avoid breathing spray mist. Avoid contact with skin, eyes or clothing. Personal Protective Equipment (PPE) Applicators and other handlers must wear: Long-sleeved shirt and long pants Chemical-resistant gloves such as barrier laminate, butyl rubber 14 mils, nitrile rubber 14 mils, neoprene rubber 14 mils, natural rubber (includes natural rubber blends and laminates) 14 mils, polyethylene, polyvinyl chloride (PVC) 14 mils, or viton 14 mils Shoes plus socks Follow the manufacturer s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product s concentrate. DO NOT reuse them. Environmental Hazards This pesticide may be hazardous to plants outside the treated area. DO NOT apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark except as directed in this label. Off-site movement from spray drift, volatilization, and runoff may be hazardous to neighboring crops and vegetative habitat utilized for food and cover by wildlife and aquatic organisms. DO NOT contaminate water when disposing of equipment washwater or rinsate. Directions For Use It is a violation of federal law to use this product in a manner inconsistent with its labeling. This label must be in the possession of the user at the time of pesticide application. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. USER SAFETY RECOMMENDATIONS Users should: Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove clothing/ppe immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. 2 AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours. EXCEPTION: If the product is soil-injected or soil-incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: Coveralls Chemical-resistant gloves such as barrier laminate, butyl rubber 14 mils, nitrile rubber 14 mils, neoprene rubber 14 mils, natural rubber (includes natural rubber blends and laminates) 14 mils, polyethylene, polyvinyl chloride (PVC) 14 mils, or viton 14 mils Shoes plus socks Ensure spray drift to nontarget species does not occur. DO NOT apply Raptor herbicide in any manner not specifically described in this label. DO NOT apply this product through any type of irrigation system. When applied by either ground or air, Raptor spray drift or other indirect contact may injure sensitive crops, including non-imidazolinone-tolerant canola, lentil, rice, sunflower, or wheat; leafy vegetables; and sugar beet. Spray equipment used for Raptor application must be drained and thoroughly cleaned with water before being used to apply other products. Observe all cautions and limitations on this label and on the labels of products used in combination with Raptor. DO NOT use Raptor other than in accordance with the instructions set forth on this label. Keep containers closed to avoid spills and contamination. STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. Pesticide Storage KEEP FROM FREEZING. DO NOT store below 32 F. Pesticide Disposal Wastes resulting from the use of this product must be disposed of on-site or at an approved waste disposal facility. Container Handling Nonrefillable Container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recycling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities. Triple rinse containers small enough to shake (capacity 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Triple rinse containers too large to shake (capacity 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. 3 In Case of Emergency In case of large-scale spill of this product, call: CHEMTREC BASF Corporation HELP (4357) In case of medical emergency regarding this product, call: Your local doctor for immediate treatment Your local poison control center (hospital) BASF Corporation HELP (4357) Steps to take if material is released or spilled: Dike and contain the spill with inert material (sand, earth, etc.) and transfer liquid and solid diking material to separate containers for disposal. Remove contaminated clothing, and wash affected skin areas with soap and water. Wash clothing before reuse. Keep the spill out of all sewers and open bodies of water. Product Information Raptor herbicide, a soluble liquid, is a postemergence herbicide to control and suppress many broadleaf and grass weeds and sedges, as listed in this label. The mode of weed-killing activity involves uptake of Raptor by foliage and/or weed roots and rapid translocation to the growing points. After Raptor application, susceptible weeds may show yellowing, and weed growth will stop. Susceptible weeds stop growing and either die or are not competitive with the crop. Adequate soil moisture is important for optimum Raptor activity. When adequate soil moisture is present, Raptor will provide residual activity on susceptible germinating weeds. Activity on established weeds will depend on the weed species and the location of its root system in the soil. A timely cultivation after Raptor application may improve weed control. Occasionally, internode shortening and/or temporary yellowing of crop plants may occur following Raptor application. These effects can be more pronounced if crops are growing in stressful environmental or hot and humid conditions. These effects occur infrequently and are temporary. Normal growth and appearance should resume within 1 to 2 weeks. DO NOT tank mix organophosphate or carbamate insecticides with Raptor on listed crops unless otherwise specified in writing by BASF. When organophosphate (such as Lorsban insecticide) or carbamate insecticides are tank mixed with Raptor, temporary injury may result to the treated crop. Separate organophosphate and Raptor application by at least 7 days to reduce potential for injury. Use of Raptor is expected to result in normal growth of rotational crops in most situations; however, various environmental and agronomic factors make it impossible to eliminate all risks associated with the use of this product and, therefore, rotational crop injury is always possible. Replanting If replanting is necessary in a field previously treated with Raptor, the field may be replanted to beans (dry), Clearfield canola, Clearfield corn, Clearfield lentil, Clearfield rice, Clearfield and Clearfield Plus sunflower, Clearfield and Clearfield Plus wheat, edamame, pea (English), peas (dry), lima bean (succulent), snap bean, or soybean. Rework the soil no deeper than 2 inches. DO NOT apply a second treatment of Raptor. DO NOT apply Pursuit herbicide, Pursuit Plus EC herbicide or Raptor if edamame or soybeans are replanted. Resistance Management Naturally occurring biotypes 1 of some of the weeds listed on this label may not be effectively controlled by this and/or other products with the ALS/AHAS enzyme-inhibiting mode of action. Other herbicides with the ALS/AHAS enzyme-inhibiting mode of action include the sulfonylureas (e.g. Finesse herbicide), imidazolinones (e.g. Beyond herbicide), the triazolopyrimidine sulfoanilides (e.g. FirstRate herbicide), the sulfonylaminocarbonyl triazolinones, and the pyrimidyl benzoates (e.g. Staple herbicide). If naturally occurring ALS/AHAS-resistant biotypes are present in a field, Raptor and/or any other ALS/AHAS enzyme-inhibiting mode of action herbicide should be tank mixed or applied sequentially with an appropriate registered herbicide having a different mode of action to ensure control. 1 A weed biotype is a naturally occurring plant within a given species that has a slightly different, but distinct, genetic makeup from other plants. Raptor is very active against many broadleaf and grass weed species. For long-term weed management, use at least two herbicides with different modes of action to reduce the potential for weed resistance. Crop (and herbicide) rotation is effective in managing weed resistance where herbicides of different modes of action are used. Tillage, where practical (such as in fallow production or before planting), is effective in controlling weeds to minimize resistance development. Additionally, a burndown herbicide during fallow or before planting is effective in reducing weed resistance development. Raptor has no preharvest interval (PHI) for any crop. Mixing Instructions Postemergence application of Raptor requires the addition of an adjuvant AND a nitrogen fertilizer solution unless otherwise directed in this label. Adjuvants When an adjuvant (or a specific adjuvant product, such as a drift control agent) is to be used with this product, the use of a Chemical Producers and Distributors Association (CPDA) certified adjuvant is recommended. 4 Crop Oil Concentrate (COC), Methylated Seed Oil (MSO), or High Surfactant Oil Concentrate (HSOC) Petroleum-based or vegetable seed-based crop oil concentrate may be used. Methylated seed oil is recommended when weeds are under moisture or temperature stress. Use MSO or COC at 1 to 2 gallons/100 gallons of spray solution [1% to 2% volume/volume (v/v)]. Use HSOC at 0.5 gallon/100 gallons of spray solution (0.5% v/v). OR Surfactant Use nonionic surfactant (NIS) containing at least 80% active ingredient. Apply NIS at 1 quart/100 gallons of spray solution (0.25% v/v). Organosilicone surfactant may be used in place of NIS. AND Nitrogen Fertilizer Recommended nitrogen-based fertilizers include liquid fertilizers [such as liquid ammonium sulfate (AMS), 28% N, 32% N, or ] at 2.5 gallons/100 gallons of spray solution. Instead of liquid fertilizer, spray-grade ammonium sulfate may be used at 12 to 15 pounds/100 gallons of spray solution. When targeting feral rye or other weeds under moisture or temperature stress, using higher nitrogen fertilizer rates [urea ammonium nitrate (UAN) at 5% v/v or 20 lbs AMS/100 gallons] may improve weed control. Additional crop response may be observed when higher fertilizer rates are used. Nitrogen fertilizer is not required when applied in use areas south of Interstate Highway 40, except in the states of Arizona, California, New Mexico, Oklahoma, and Texas. Liquid Fertilizer as a Carrier DO NOT apply Raptor herbicide in liquid fertilizer as a carrier unless specifically allowed for a given crop. Refer to Crop-specific Information section for adjuvant recommendations and/or restrictions by crop. Additional Mixing Instructions for Dry Beans and Dry Peas [other than English Pea, Lima Bean (Succulent), Snap Bean, and Clearfield Lentil]. Raptor application may be made to dry beans and dry peas either with or without the addition of a fertilizer. The addition of nitrogen-based fertilizer, such as ammonium sulfate or liquid fertilizer (such as ), may improve weed control but also increases the likelihood of dry beans and dry peas response. When nitrogen is added to the mixture, add Basagran herbicide (at 6 fl ozs to 16 fl ozs/a) to minimize crop response. For application to dry peas, ALWAYS add Basagran to the spray mixture. For enhanced grass activity, add crop oil or methylated seed oil instead of surfactant. ALWAYS add Basagran at 5 the rates indicated above when crop oils and/or fertilizers are used in the spray mixture. Basagran application at rates higher than 16 fl ozs/a may reduce grass control. See application information within English Pea; Lima Bean (Succulent); and Snap Bean in Crop-specific Information section for additional mixing instructions. Tank Mix Instructions When applying Raptor as the only herbicide: 1. Fill spray tank 1/2 to 3/4 full with clean water. 2. While agitating, add Raptor to the spray tank. 3. Add adjuvants. 4. Fill remainder of spray tank with water. If other herbicides or other spray tank components are tank mixed with Raptor, while agitating, add components in the following order and thoroughly mix after adding each component. 1. Fill spray tank 1/2 to 3/4 full with clean water. 2. Add soluble-packet products and thoroughly mix. 3. Add WP (wettable powder), DG (dispersible granule), DF (dry flowable), or liquid flowable formulations not in soluble packets. 4. Add Raptor and thoroughly mix. 5. Add other aqueous solution products. 6. Add EC (emulsifiable concentrate) products. 7. Add surfactant or crop oil to the spray tank. 8. Add nitrogen fertilizer solution. 9. While agitating, fill the remainder of the tank with water. When Raptor is used in combination with another herbicide, refer to the respective label for rates, methods of application, proper timing, weeds controlled, restrictions, and precautions. Always use in accordance with the most restrictive label restrictions and precautions. DO NOT exceed label rates. Raptor cannot be mixed with any product containing a label prohibiting such mixtures. Cleaning Spray Equipment To avoid injury to sensitive crops, spray equipment used for Raptor application must be drained and thoroughly cleaned with water before being used to apply other products. Spraying Instructions DO NOT apply when wind conditions may result in drift, when temperature inversion conditions exist, or when spray may be carried to sensitive crops. Sensitive crops include, but are not limited to, leafy vegetables and sugar beet. Ground Application Uniformly apply with properly calibrated ground equipment in 10 or more gallons of water per acre. A spray pressure of 20 to 40 PSI is recommended. To ensure thorough coverage, use a minimum of 20 gallons of water per acre when applying Raptor to minimum-till or no-till crops. Use higher gallonage for fields with dense vegetation or heavy crop residue. Adjust the boom height to ensure proper coverage of weed foliage (according to the manufacturer s instructions). Use flat-fan nozzle tips or similar appropriate nozzle tips to ensure thorough coverage. Avoid overlaps when spraying. Ground Application with a Low-volume Sprayer Raptor herbicide may be applied with a low-volume sprayer. When applying Raptor with a low-volume sprayer, spray weeds before they reach the maximum size listed in this label. Weed control depends on thorough spray coverage. The sprayer must be calibrated to deliver the recommended spray volume and pressure to ensure thorough spray coverage of weeds. When applying Raptor with a low-volume sprayer, apply a minimum of 10 gallons per acre of spray solution with a nozzle pressure between 40 to 60 PSI for optimum coverage. Aerial Application Raptor may be applied by air to all crops listed on this label. Uniformly apply with properly calibrated equipment in 5 or more gallons of water per acre. The addition of an adjuvant AND a nitrogen fertilizer solution are required for optimum weed control, unless otherwise directed in this label. Avoiding spray drift
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks